Introduction
The bamboo fly rod begins with culm, which is simply a stalk of dried bamboo. The culm walls are divided into three parts: outer wall called enamel, denser power fibres that makes the material durable and chalky pith. The length of the culm varies from 6ft to 12 ft. The rod maker splits it up into twice the dozen times to make the tapered strips that will be glued together. The glued tapered strips form a hollow section.
Many tools are used to transition a bamboo talk into a classic bamboo flying rod. The fly rod-making process should also be done delicately and precisely since it determines its performance.
Tools used in making
The rod makers have specialized tools to turn a culm of bamboo into a classic bamboo fly rods. The knife splits the culm into strips along the grain called a froe. The froe gets hammered using a mallet or club. Transforming the strip into an equilateral triangle is inevitable. It will rightly fit with five others to create the hexagonal blank. This process needs hand work or a mill. Many rod makers utilize a grooved planning form and hand gripped block plane to narrow the finished strips.
How to make Classic bamboo fly rods
Making classic bamboo fly rods needs expertise in many domains, from carpentry to joinery to engineering. The transformation from a stalk of bamboo into a fly rod.
Picking bamboo
Take into account its straightness, regularity and size of nodes, and the presence of marks or blemishes. The rods formed using natural bamboo are called blonde. If you want to give it a wooden touch, then heat should be applied evenly to it.
Cutting in splits
The culm is cut into strips using various tools such as a froe, knife, saw or cutting jig. The culm with 6 inch perimeter will give you 16 to 24 strips. Later, The rod builders pick the best strips and arrange them up so the nodes will be stable along with the furnished blank. The strips should be straightened up, and the nodes should be erected using heat.
Giving shape to the rod
Giving shape to the classic bamboo fly rods is the most important part of the making process. The six strips are made using rough planning that can fit together well. The strips of each section were then combined together using a cotton thread. The made sections are put in the oven for heating. The heating helps remove excess moisture in the whole formation.
Final touch
The enamel on the strip’s outer side is removed and put in order to form a proper taper. The strips are combined to ensure the fit. They are attached together using glue to form a blank and bound with thread, if everything is kosher. The thread gets removed after setting up of glue. Then ferrules, reel seat and guides are added. In the end, a cosmetic touch is given to make the bamboo rod appealing.
The fly rod-making needs ample precision. There are many steps to follow to make the rod more functioning and efficient. Each step is important to enhance the chances of bamboo fly rods for sale ranging from picking bamboo, to cutting and assembling strips. The expert rod maker uses many tools to give it a proper shape and design.
Source URL : https://www.classicflyfishingtackle.com//product-category/rods/
