As the price of non-renewable energy continues to fluctuate, more and more homeowners are switching to renewable energy sources. And among the available renewable electricity sources, solar energy is the most abundant and affordable.

Plus, the idea of cutting down the monthly electricity bill and increasing the value of the house has made many people turn to solar energy. And thanks to ever-evolving technology, the efficiency of solar energy has improved while its cost has decreased dramatically in the last few decades.

Therefore, switching to solar energy is one of the best ways to protect our environment and save some cash in the long run. And despite the change in solar panel technology, most of the tools for installing solar panels have remained the same over the last few decades. So here are some of the essential tools for DIY installation.

The Most Essential Tools for DIY Solar Installation

  1. Digital Multimeter

The solar panel uses a photovoltaic system to convert light into electricity using semiconductors. The use of solar tools right multimeter can help you confirm the quality of power being emitted by each cell. A digital multimeter combines the testing capabilities of an ohmmeter, ammeter, and voltmeter. This tool can also help with the maintenance and repair of solar panels.

  1. Battery Operated Drill4. Flat Pry Bar

One of the less common, but very helpful tools for installing solar panels is the flat pry bar. Since most roofs have shingles, you will need a flat pry bar to help you slide the flashing under it. Remember, the mounts should be installed directly on the roof or beneath the shingles. Once you lift the shingle on the exact spot where you want to install your mounts, you can slide in the flashing and screw the mounts onto the roof and then add the rails.

  1. Hack Saw

Remember, the solar panels will rest on some rails which you will install on your roof. Therefore, you will need to cut the rails before installing them or after you have finished installing the panels. A hack saw is affordable and easy to use, plus you can use it in your future DIY projects.

  1. Flat Pry Bar

One of the less common, but very helpful tools for installing solar panels is the flat pry bar. Since most roofs have shingles, you will need a flat pry bar to help you slide the flashing under it. Remember, the mounts should be installed directly on the roof or beneath the shingles. Once you lift the shingle on the exact spot where you want to install your mounts, you can slide in the flashing and screw the mounts onto the roof and then add the rails.

  1. Caulk Gun

Since the mounts and rails must be installed on your roof, you will have to drill numerous holes on your roof after removing the shingles. Fill the hole with roofing caulk and then screw the mount into the holes using. Therefore, you will need a caulk gun to help you apply the sealant safely and accurately. The roof sealant will prevent leakages in the future and help protect your ceiling.

Battery-operated drills may be simple, but you can be surprised by how many professional solar panel installers still use the corded drills. However, a battery-powered drill is portable, efficient, and powerful enough to handle all the drilling tasks on the roof. A battery-operated drill can make work easier while lowering the risk of falling off the roof.