Yes! Once Polished concrete floors are installed they must undergo daily cleaning procedures until they are cured completely (which can take up to 7 days). During this time polished concrete floors are very susceptible to staining, water spotting and other contaminates. Daily cleaning, while the polished concrete is curing, will ensure that no damage or changes are made to polished surfaces by using incorrect methods of cleaning.
What type of floor cleaners should I use for polished concrete?
A liquid dish detergent diluted with clean water can be used on polished concrete floors. Apply a small amount to the surface area being cleaned with a mop or rag, scrubbing well into the grout lines. This method is effective at removing dirt, dust, and contaminants that may have accumulated during construction or installation processes. After scrubbing has been completed rinse the entire floor thoroughly with clear water to remove all soap residue from polished surfaces before it becomes dry completely.
Do polished concrete floors need to be waxed?
Polished concrete floors that are not sealed with polyacrylic or water-based sealers do require waxing. Wax imparts shine to the polished floor, fills in micro-scratches, and imparts an attractive appearance. Use either a liquid or paste type of wax (depending on the desired level of gloss), apply it to polished surfaces using a damp mop, and remove excess wax by buffing the surface with a terry cloth rag. Allow polished concrete floors to completely dry before walking on them. Are there any cleaners I should avoid using on polished concrete? Do not use any highly acidic cleaners such as ammonia, bleach on polished concrete until after polished’s complete curing process is complete (up to 7 days). Highly acidic cleaners may etch polished concrete surfaces which can create a polished surface that is difficult to clean in the future.
What type of wax should I use on polished concrete floors?
Use either liquid or paste wax for polished concrete. Apply with a damp mop, allow it to dry thoroughly before you wipe off excess wax with a terry cloth rag. Use of recommended amount (a thin layer) of wax will provide enough protection and shine for polished surfaces while filling in micro scratches that are present after installation. The level of gloss desired will determine the thickness of the layer applied during the application process. For more information contact your local polished concrete contractor who specializes in polishing residential homes & commercial throughout Melbourne Australia today!
