The durability and performance of a tyre are affected by various factors. This article depicts various such factors in elaboration. As a car owner or driver, you must get acquainted with these factors. Here we go!

Pressure of Inflation

If you don’t inflate your tyres with recommended pressure, the technology and science used in Continental Tyres Stockport manufacturing would go wasted. Even the best quality tyres would fail. The recommended pressure is always set according to the load the tyre is supposed to carry. You can get high performance out of your tyres only when you inflate them with the suggested amount of pressure.

Two factors are linked to the vehicle’s weight distribution. They are the tyre wearing and contact patch. In case of under-inflation, the contact patch is more. This results in more fuel consumption, early tyre replacement, a decrease in tyre life and more rolling resistance as the tyre temperature increases.

You will find the occurrence of Under Inflation more than Overinflation. The vehicle owners are not concerned about maintaining a balance between the load carried and the tyre pressure. The load is carried by air in a pneumatic tyre. The low tyre CPKM and the best performance of tyre are gained by proper tyre inflation with correct pressure.

The total carried weight must not be more than the passing weight of the vehicle. But, as a result of incorrect load distribution in the loading region, one axle or side of the truck may be overloaded severely. The tyre gets overloaded by the improper distribution of the load.

Wheel Alignment

You can consider a vehicle perfectly aligned if all its suspension and steering parts are in the set according to the manufacturer’s recommendation. In aligned wheels, the assembly runs straight.

For ensuring regular tyre wearing, more safety and efficient vehicle control, proper alignment is essential. Thus, when you see your tyres wearing unevenly, or face issues like pulling, or vibrations while riding, you must check the alignment of your car.

Speed

Too high speed leads to more temperature in a running tyre. The stiffness of the rubber minimizes as its heats up. It results in more wearing of tyre and components separation.

Tyre rotation

For even wearing of tyres, tyre rotation is suggested in every wheel position. It enables you to get the optimum life of your tyre. Rotating tyres according to the recommendation of the manufacturer is essential especially when you notice irregular tyre wear.

Wheel Balancing

An improperly balanced wheel may cause vibrations and affect steering control adversely. Before coming out of the factory, the tubes, tyres and wheels are inspected for balance. Weights are placed on the wheels to achieve this balance. For more tyre durability and comfort driving, correctly balanced tyres are crucial.

When the Tyres Stockport is mounted on the wheels at first, it is checked for balance. They are also inspected for balance while being removed for repair or periodically.

Driving habits

Some damages, fatal accidents can be prevented with careful driving habits. The durability and performance of the tyre are also ensured.

Road Conditions

The tyre using conditions that affect both the structural durability and life of the tyre are:

  • Abrasive or Rough road surface

  • Straight road

  • Paved road

  • Incomplete country roads

  • Road with Hilly windings

  • Broken roads

Do’s & Don’ts

  • You must use an accurate gauge to check the pressure.

  • You must check your tyre pressure including that of the spare tyre, periodically.

  • Early tyre failures and faster tyre wearing are caused by over or under-inflation.

  • You must inspect the tyre pressure only when the tyre is cold.