Carbon fiber strips bond easily. The rigid surface of the metal allows it to bond with carbon fiber plates, balsa wood, plywood and even aluminum. Today, we are going to discuss all the aspects that you should follow when selecting adhesives for bonding other materials to carbon fiber sheets.
Use epoxy to bond carbon fiber strips:
When carbon fiber strips are manufactured with the pultrusion technique in an epoxy mix, which sticks easily to other materials. This happens because epoxy has a longer setup time as compared to CA glue. Moreover, it is less brittle. Below are some of the steps that you need to follow in order to join carbon strips using epoxy:
- Sand both the surfaces that you want to bond. Make sure that you slightly sand the surfaces. Don’t overdo it.
- Clean the surfaces to make sure that there is no loose debris. It will affect the bonding process.
- Use acetone or isopropyl alcohol to degrease the parts.
- Dry the parts properly. This will help in better bonding.
- Now apply epoxy on both the surfaces that you want to bond.
- You can use a clamp, fixture or tape to bring the surfaces together. This will help to compress the glue and force out the air and extra epoxy.
- Now clean the excess epoxy and then wipe the joint before the epoxy turns to harden.
Use hot glue to bond carbon fiber strips:
When you are trying to bond carbon fiber material to balsa wood many find hot glue really very effective. Below are the steps that you need to follow:
- Put a bead of hot glue on the balsa wood.
- Place the carbon fiber strip on top of the glue and press it firmly.
- Hold it in position till the hot glue starts to cool down.
Use woodworking glue to bond carbon fiber strips:
Many prefer this glue because of the ease of working with it. But, unfortunately, not all the glues help carbon fiber sheets to bond with other materials as well as epoxy. Cleaning the surface before applying the woodworking glue might work but the strong adhesion that you are expecting is only possible when you use epoxy. Lack of adhesion causes all the other glues to fail. You need to be very careful regarding the kind of glue you are planning to use.
Tips to follow when you are bonding carbon fiber strips
When it comes to bonding carbon fiber fabric, it is important that you make the right preparation. Go through all the instructions for proper adhesion. It is important that you are well aware of all the steps before you begin the process. The area where you plan to carry out the bonding process should be well-stocked and should have all the necessary tools required. When you are selecting the adhesive, consider the ultimate goal of the project. This will help to streamline your search and make an informed decision. Some crucial factors to consider:
- How long do you need to work with the glue/adhesive before it starts to dry up?
- How much time will it take for the carbon fiber strip and the other materials to bond? Do you need to use clamps or hold it in place till it sets?
- How much will the adhesive take to cure before you can consider the project to be complete?
- How much weight can the adhesive/glue bear before it fails? Is that enough for the project that you have in mind?
- Finally, does the temperature range of the adhesive meet your project needs?
Summing it up:
When you are looking for an efficient stiffener for your projects, consider carbon fiber strips. They bond well with a wide range of materials. All that you need to do is follow some steps and the bonding is complete. Ensure that you choose the appropriate adhesive/glue and follow the steps for bonding so that you get the desired results.