If your Arlo camera blinks orange light, then this might be happening because of a low battery or a hardware issue. Sometimes the battery is perfect but low or weak internet creates hurdles to operate with Arlo cameras. It is possible that not only a battery issue but a network problem that is causing the orange light to blink.
There are many issues that cause the orange light to blink like low charge, improper scanning, hardware harm, and consumed battery.
How to fix Arlo camera blinks orange:
Here are some easy and quick methods to fix the Arlo camera blinks orange. In this section, you will find effective methods to fix it. Follow each step and it will help you to get rid of Arlo orange light.
Rest Arlo camera:
- Open the Arlo app on your phone.
- Go to the settings and select my devices.
- Then choose your camera and select remove the device.
- And then accept it by pressing yes.
- Again go back to my device and click the new device.
- Select the camera and follow the instructions given on the screen.
Charge your camera full:
- Remove the camera from its place.
- Then remove the USB cover from the bottom of the camera.
- Insert the charger into the camera and in the power socket.
- And let the camera charge.
- Do not remove the charger until it is fully charged.
Insert new batteries:
- Take out the camera from its place.
- Press the battery compartment down and remove the cover.
- Remove the straps and then the batteries.
- Then wait for at least 5-6 minutes.
- Insert the new batteries properly.
- Close the compartment and test the camera.
Resync the camera:
- If the Arlo camera is blinking orange then you can sync with the base station.
- To sync the camera with the base station, use the sync button.
- Press and hold the sync button on the camera.
- Restore the connection with the base station.
- After that, follow the reset steps mentioned above on your Arlo app.
Check wifi connection:
Move the Arlo camera closer to the wifi router so that there should not be a connectivity issue. If you are using a base station, make sure that it is within the range of the router network.
Add Arlo camera to the app:
- Open the Arlo app.
- Go to the device, then click add a new device.
- Then select cameras.
- In the end, follow the instructions given in the app.
- Re-add the Arlo camera to the app.
Why does the Arlo camera blinks orange light twice?
If you ever notice that the Arlo camera is blinking orange light twice, then no need to worry. This generally indicates that the battery of the camera is running low. In this case, you just need to take out the camera from its place and connect it to a USB charger.
What indicates the Arlo camera blinks orange when charging?
The Arlo camera is blinking orange light while charging, which indicates that the battery is low. Charge the camera, if it is already charging then you don’t have to do anything. Do not remove your camera, it will take half an hour to get charged fully.
What is the meaning of Arlo’s orange light when syncing?
The Arlo camera might blink orange light while syncing, which indicates that the camera has lost sync base station. There is no need to do anything except sync your camera with the base station.
Sum Up:
Arlo camera blinks orange is a temporary and common issue that users usually face. This happens because of low battery, you can fix this issue in just some simple steps. Hopefully, the above-given solution will be helpful for you.
