When you are driving your car on a road, it is important that it is in perfect condition. This is not about performance but safety. Thus, a roadworthy car will not only be safe for you, but also for others on the road. And this is the primary purpose of the MOT test. This is an annual inspection that is done to ensure the vehicle you are driving is safe and fit for use, and that it is devoid of any underlying problems. As such, it is very important for you to not only appear for the test but also pass it. However, to pass an MOT, you will have to make sure that your car is not problematic, so, first, you might want to go for a car service or Exhaust Repair in Coventry. Then, you can try the following tips to improve your chances of passing the test.

Ensure Your Car Lights Are Functional

The very first thing you should take care of, prior to going to an MOT, is the several lights on your car. This includes the headlights, tail lights, indicators, cabin lights, and even the brake lights. Because, as per DVSA, almost 30% of all MOT failures can be attributed to faulty lights, damaged glass, foggy lights, and so on. So, when you are heading to an MOT, first, make sure that all the lights on your car are working fine. Then, you can try to replace the bulbs that are either flickering or not working properly. For a more comprehensive result, you can also head to an auto repair shop for a basic car inspection before you head to your MOT in Coventry. Once you are sure, you can get your car inspected.

Check The Tread Depth of Your Tyres

After the lights, you should focus on the tread depth of your car tyres. Yes, tyres are also one of the major contributors to MOT fails, and they will be inspected during the test as well. You should know that your car tyres need to have a minimum tread depth of 1.6 mm for them to be fit for driving, legally. So, a tread depth that is less, will cause you to fail the test, even if other components of your car are fine.

Maintain Correct Tyre Pressure and Optimal Condition

Along the tread of the tyres, their air pressure and condition will also be inspected. So, make sure that your tyres don’t have any signs of damage, such as cracks or cuts. Furthermore, make sure that your tyres are properly inflated. For those who don’t know, both underinflated and overinflated tyres can cause you to fail the test, as both scenarios are not ideal for driving. So, before heading to the MOT, you should check your tyres to make sure they are not damaged and then use a tyre gauge to measure air pressure.

Make Sure The Windshield Is Not Cracked

For those who don’t know, the windshield is also considered an important aspect of an MOT test. Thus, if there are any problems with the windshield, you might end up failing the test. A clean and intact widescreen is needed to make sure that the driver can have a clear line of sight of the road. So, any problems with the windscreen are considered dangerous, as they can hinder the driver and lead to an accident. So, before going to an MOT test, you should take a good look at your windshield, and make sure there are no cracks or any other signs of damage. In some cases, you can still pass an MOT if the crack is very small, like 10 mm wide, however, such cracks won’t be in the direct line of sight of a driver.

Check The Wipers and Washers

Just like the windscreen, you should check the wipers and washers and make sure that they are functional. Yes, we understand that it might seem a bit excessive, and readers might wonder what it has to do with road safety. But you should know, that there has to be a reason why faulty wipers contribute to 10% of total MOT failures. This is because wipers are needed when the weather is bad, to keep the windscreen clean, thus allowing the driver to watch the road properly. So, if the wiper is not functional or if the rubber is worn out, then you might fail the MOT test.

Ensure Your Car Has Functional Brakes

This might not come as a surprise, but brakes are also a major component that is checked during an MOT. This is because brakes are directly linked to a car’s safety. So, if your car has faulty brakes, such as worn-out rotors and brake pads or loose or soft brake pedals. So, before going for an MOT, it’s pertinent that you get your car thoroughly inspected at an auto repair shop, and only when you are convinced should you take it for an MOT test.

Keep The Registration Plates Clean

And lastly, you should make sure that your registration plates are clean and that they adhere to the regulations. If the numbers on the plate are not visible, it can lead you to fail the test. Hence, before going to your MOT, you should make sure to check the registration plate and ensure that the number written on it is visible, clean, and in accordance with the law.