ULTRAPLAN ECO 20

Rapid hydrating, fast-drying self-leveling compound UAE you can choose from Mapei.
WHERE TO USE
Ultraplan Eco 20 is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive flooring where a high resistance to loads and traffic is required.
Ultraplan Eco 20 is for interior use only. Typical applications would include use in hospitals, hotels, theatres, schools and shopping centres.
TECHNICAL DATA:
Mixing ratio: 24-25 parts water per 100 parts by weight of Ultraplan Eco 20
Thickness per coat: from 1 to 10 mm
Pot life: 20-30 minutes
Setting time: 45-60 minutes
Set to light foot traffic: 3-4 hours
Waiting time before subsequent bonding: 24-48 hours
Colour: grey
EMICODE: EC1 R PLUS – very low emission
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
Storage: 12 months in a dry place in original packing
TECHNICAL CHARACTERISTICS
Ultraplan Eco 20 is a grey powder consisting of special cement with fast setting and hydrating properties, with selected graded silica sand, resins, and special additives prepared according to a formula developed in the MAPEI Research Laboratories. Mixed with water, Ultraplan Eco 20 becomes a fast-drying yet fluid and easily workable compound, perfectly self-leveling with a high bond strength to the substrate.
Ultraplan Eco 20 can be applied with an automatic pressure pump for distances over 100 m.
Ultraplan Eco 20 can be applied in thicknesses up to 10 mm per layer without shrinkage, cracking, or crazing, and develops good compressive and flexural strength as well as resistance to indentation and abrasion. For thicknesses greater than 10 mm (max. 20 mm), it may be necessary to add graded sand or alternatively to use a product more suitable for thicker sections such as Ultraplan Maxi. However, please contact your local MAPEI representative for guidelines and recommendations. Due to its rapid hydration formulation, subsequent installation of most types of flooring can begin approx. 12 hours after the application of Ultraplan Eco 20, regardless of thickness. For resilient allow a minimum 24 hours of prior to application.
CONSUMPTION
1.6 kg/m² per mm of thickness.
PACKAGING
Ultraplan Eco 20 is available in 23 kg bags.
STORAGE
When stored in dry conditions in the original, unopened bags, Ultraplan Eco 20 has a shelf life of 12 months. If stored at high temperatures and or high humidity conditions the shelf life may be reduced. A longer storage period could determine a slower setting time for Ultraplan Eco 20. However, the performance of the levelling layer in the long term is not significantly affected.