You may notice problems with your industrial Atlas Copco air compressor in Faridabad as the weather drops below freezing this season. icy

Condensate freezing is a typical issue in compressed air systems during winter. Several problems, including broken heat exchangers, frozen valves, and frozen control lines, can arise when condensate freezes and thaws.

If you want your compressor to last all winter long and work at peak efficiency, follow these guidelines, shared by a reputed dealer of screw compressors in Palwal and Faridabad.

  1. WEATHER-PROOF YOUR AIR COMPRESSOR

If your air compressor wasn’t made to withstand winter elements, you should take the time to winterize it before you use it in the wet, cold, and icy weather.

  1. PRACTICE THOROUGH MAINTENANCE ALL WINTER LONG

Maintenance is as important as initial weatherizing. If you use your compressor in near-freezing conditions, it will need weather-sensitive care. Important maintenance tips:

Drains: A clogged or broken drain can cause frozen condensate to shatter components and plug aircraft or orifices. If you don’t have an automated drainage system, empty the drain daily to prevent freezing.

Lubricant: Cold temperatures can thicken and reduce the effectiveness of lubricants. Thick lubrication requires more effort to drive the pump, which strains and overloads the motor. It also doesn’t flow effectively, which might deprive rotating components of lubricant, causing early wear.

Filters: Change your filters often.

Leak detection: Leaks can cause significant energy losses; thus, repairing them is crucial for equipment efficiency. Consider employing a third-party servicer using ultrasonic leak-detecting technology to check for leaks.

  1. MAINTAIN AN AMBIENT INDOOR ENVIRONMENT

Put your compressor someplace warm and dry to keep it from freezing up. Using these methods, you can keep the compressor’s interior at a comfortable temperature even in the dead of winter

Ventilation: In the warmer months, proper ventilation for your compressor is essential. The fans and exhaust louvers will activate if the temperature rises over a certain threshold.

Temperature: Even in winter, your compressor chamber should be kept at around 45 degrees Fahrenheit, as no industrial air compressor can function at temperatures lower than 40 F.

Website:  https://gravitas.co.in/