It’s possible that the sound produced by the audio system in your car isn’t living up to your expectations. Alternatively, you may have considered improving your equipment in order to increase the quality of what you hear.
Your overall listening experience may be enhanced in a variety of ways by using subwoofers, which are available in two different flavors: single-voice coil and dual-voice coil. Be aware of the distinction between the two and carefully assess which of the two will be of more use to you.
A speaker cabinet known as a subwoofer is one that may be connected to the audio system of your motor vehicle. Since low sounds, such as bass, need a bigger speaker capacity, the primary speakers of an audio system are often only equipped to reproduce high and mid-range sounds. This is because low sounds require a larger speaker capacity.
If you want your audio system to have access to the complete spectrum of sounds, adding a subwoofer to it is a good idea. Individual subwoofers are available for purchase, and they bring with them a number of advantageous features. In addition, if you do not have a subwoofer, playing bass might cause harm to your audio system.
The dual voice coil subwoofer that measures 12 inches is the one that you should choose if you want a subwoofer that is so powerful that it can shake windows and make your ears ring. In addition to that, it is an excellent choice. It is equipped with two voice coils, each of which has a diameter of one inch, and is accompanied by the gadget.
You will need to bring the volume up to its highest setting in order to get a good bass response from these speakers, despite the fact that they can resist up to 1200 watts of energy. This is because the speakers are designed to handle such high levels of power.
Choose A Subwoofer That Has A Broad Frequency Response
Subwoofers with twin voice coils and a dimension of 12 inches have a better frequency response than their counterparts with a single voice coil because of the increased number of turns on each voice coil.
This is because, instead of merely having one voice coil that is wrapped together and entangled, there are really two voice coils that are wrapped together and entangled. The reason for this is that there are truly two voice coils that are wrapped together and entangled.
Moreover, there is just one set of terminals that are connected to the magnetic wire, and the impedance of a single voice coil subwoofer is typically either 1 ohm, 2 ohms, or 4 ohms. If you wire a DVC subwoofer so that the voice coil pairs are connected in parallel instead of in series, the resulting device will have a different impedance than one that is wired so that the voice coil pairs are connected in series.
This is because parallel wiring uses more wire than series wiring does to connect the voice coil pairs. This is because connecting the voice coil pairs with parallel wiring requires a greater amount of wire than doing so with series wiring. You won’t just discover one but two different sets of connecting choices when you purchase a subwoofer from DVC.
You have the extra choice of connecting a subwoofer with a 2-ohm impedance to a stereo amplifier in either series or parallel if you are using DVC wiring. This is determined by the number of woofers that are being utilized and the power needs of the amplifier.
Those who are wiring their homes with DVC have exclusive access to this extra degree of freedom. Individuals who are wiring their houses with DVC have access to this additional degree of flexibility, which is not available to everyone else.
This gives you more flexibility in the event that you ever decide to alter or add components to your system in the future, such as increasing the number of amplifiers or subwoofers. For example, you may opt to upgrade your system so that it can support a larger number of amplifiers. Consider, for instance, the following:
Match the Impedance to the Installed Amplifier
Subwoofers that have a dual voice coil that is 12 inches in diameter use two magnetic wire coils that are linked to each other and work in harmony to create sound and a bass that is free of distortion. The diameter of the dual voice coil is 12 inches. A twin voice coil that measures 12 inches in diameter can be found in each of these subwoofers.
It has the same fundamental construction as a subwoofer with a single voice coil, but it also has an additional voice coil and two sets of terminals for increased power output; one set of terminals is positive, and the other set of terminals is negative.
Both sets of terminals are connected to the same power source. Both sets of terminals are linked to the same power supply through a common connection. Both sets of terminals that were added to the amplifier are now linked to the bigger voice coil that was installed.
Because of this, it is a fantastic component for bridged two-channel amplifiers in addition to multiple-channel amplifiers that have fluctuating load impedances. As a direct result of this, it is also an excellent component for power amplifiers.
If you choose a subwoofer model that offers a selection of different voice coil terminal pairs and comes in 1-ohm, 2-ohm, and 4-ohm iterations, you will have a wider range of options for how to wire the speaker. This is a big advancement over a device that simply has a single voice coil, which is the only component that this one has.
Wiring for low impedance is an absolute necessity when utilizing multi-channel amplifiers with more than one subwoofer, combining dual voice coil subwoofers with a vehicle amplifier that may not be capable of bridging two channels, adding an additional amplifier later on in the system, or combining any of these scenarios. Except for that particular circumstance, there are none of any others in which low-impedance wiring is necessary.
In addition to this, it improves the power handling capabilities of the amplifier in the vehicle. This can either increase the output of the amplifier or the power handling capacity of the amplifier, depending on the number of subwoofers that are linked to one amplifier channel and the individual voice coil wiring configurations of each subwoofer.
Longer Coverage on the Cones’ Warranty
Consumers who purchased the Solo-Baric(r) L7T 12-inch dual voice coil subwoofer from an authorized dealer are qualified for the 2-year limited warranty that was included with the subwoofer. This warranty covers manufacturer defects in materials and workmanship.
This guarantee covers any manufacturing flaws that manifest themselves throughout the length of time covered by the warranty. Under the terms of this warranty, the subwoofer will be replaced free of charge if there is a defect in the production. This warranty is only valid inside the continental United States of America and its territories.
The warranty does not cover situations in which the speaker was used in a manner that was inconsistent with the specifications given on the packaging of the product, nor does it apply to things that have been changed or repaired by anyone other than Sundown Audio.
Additionally, the warranty does not cover situations in which the speaker was used in a manner that was inconsistent with the specifications given on the packaging of the product. In the case that the speaker was used, none of these possibilities would be addressed.
