There are two kinds of foundations used extensively during the building of a new home, Stem-Walls as well as Monolithic slabs. Each has its own advantages and drawbacks during construction, and it is crucial to understand these before digging a foundation for the construction of a new home. In this article , we will examine the advantages and differences from both kinds of foundations.

Monolithic refers to “all in one go” therefore the foundation is made in a single pour. It comprises of the concrete slab, which has thicker areas beneath walls that bear loads and the perimeter edges that serve as footers. Because the Slab is constructed all simultaneously, it’s more efficient and helps keep labor costs down.

When utilized in the proper conditions, Monoslabs could be just as sturdy than Stem-Walls. In the majority of sub division communities constructions the ground is level across the entire lot and more densely compacted , with minimal fill dirt to be required. If all floor elevations completed are similar between lots, and there isn’t much slope, then Monoslabs could be the ideal choice.

There are a few major problems that may arise if conditions do not favor the use of a monolithic slab. It is not recommended to use them for areas where lots filling dirt needed since they are more prone to break if the soil isn’t properly compacted. This can be a problem for houses that must be constructed to be higher than the flood plain laid out by the engineer (as most lot developments in Florida should). In this case, Monoslabs tend to crack around the perimeter walls as well as other important load bearing areas. The cracks can lead to structural issues that impact other areas of the house later in the construction process such as flooring and drywall in the event that the walls aren’t strong enough.

This is why the majority of construction companies in Florida (including the us) favor stemwall-based foundations.

Most fence post distances can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire