We are the Manufacturer of Ceramic Injection Machine for the manufacture of Ceramic cores for the Investment casting machines, Ceramic Injection machines, wax injector Equipment, abrasive cutoff machines, Lost Wax Foundry Industry in Kolhapur, Maharashtra, India.
1. DIE MAKING USED FOR PRODUCING WAX PATTERNS:
This is the most important first step in the entire investment casting process. Any error in the die is reproduced in the finished casting. Extreme care is necessary when making a die. The die should be simple in its construction. This will make it easy to use and enhance its production rates.
Certain dimensional changes are intrinsic to the process, namely:
a) Wax shrinkage.
b) Expansion of the shell during firing.
c) Cast metal shrinkage during solidification.
Allowance for each of these dimensional changes is to be incorporated in the die. Dies are usually made of aluminium.
Conventional techniques are used for making dies.
2. PRODUCTION OF WAX PATTERNS:
This is done using the Hydraulic Wax Injection Machines.
a) Wax is melted and brought to the required temperature in wax melters.
b) The molten wax is then transferred to the wax injection machines.
c) Wax is injected under pressure into the die at appropriate temperatures. In case the component is large, the dies are cooled using water jackets.
d) The wax patterns are extracted from the dies and stored in a cool place.
e) These patterns are then taken for assembly. Pattern Assembly This is the next important step. Correct design of ingates, and cluster design play a major role in the outcome of the castings. The patterns are assembled to a running and feeding system by welding with a wax-welding gun and with wax glue (stick wax).
