When creating any type of furniture out of wood or plywood, you may have an issue with wooden boards. After cutting them into pieces, they have rough, raw edges that stay that way even if you edge band them. These edges absorb moisture, harm your furniture, and make it appear hard-grained. Trim the edges with a suitable edge banding trimmer that will make your wooden furniture smooth and free of scattered borders. To properly trim a wooden board or edge banding, follow the steps below.
What is edge banding and why you should trim it?
Edge Banding – Edge banding is a thin stripe applied to the wood border. When you cut your wooden boards to make anything, they occasionally overhang or have a rough tippling surface edge. The raw side is then sealed with a thin substance. It helps to keep your wood sides from warping. They must be trimmed once you have finished edge banding. Trimming is the procedure of smoothing the edge banding. It is used to precisely align the banding on the borders. Banding them will conceal the edge and keep moisture out of the woods. The banding also helps to reduce liquid leaks. Trimming the banding with an edge banding trimmer completes the look. This will ensure that your wood’s edges become smooth, and you will achieve a beautiful result.
The process of trimming the edge banding with an edge banding trimmer
In the marketplace, you can discover many choices for trimming an edge banding, such as sandpaper or an iron file, an edge banding trimmer, and so on. Among these possibilities, you may use an edge banding trimmer to cleanly trim the edge banding. Look at the stages below to learn about the procedure.
Step -1 – Examine the area attentively to see where the grain is visible and where any spillage is occurring.
Step – 2 – Apply the trimmer in the same direction that the grain begins to spread. Oppositely pushing the trimmer will pull up the excess bands.
Step – 3 – To finish, take a sandpaper block and rub it down the edge.
Things you need to focus on at the time of trimming
- Using the trimmer might be difficult at times since it takes so little time and everything happens so rapidly. Take care not to ruin the finish.
- Sand the surface gently, using only two quick passes after and before cutting it.
Conclusion
If you want to buy a good edge banding trimmer online after learning how to trim a wooden item or edge banding, do a search now. Find a dependable internet merchant that sells an edge banding trimmer with a handle and a blade for trimming that can be used on wood veneer, melamine, PVC, and other thin edge banding. Consider a low-cost trimmer with a replaceable blade that is easily available over the internet. Using a trimmer will not only allow you to smooth the edges, but it will also be an enjoyable experience if you know how to trim properly.
