Canon’s printing capabilities are excellent for satisfying day-to-day printing needs. Canon printers include a user-friendly interface, updated firmware, fresh innovation, and a variety of features that result in high-quality printing. If you wish to take use of all of these Canon printer benefits, you must first complete the ij.start.canon ts3122 wireless setup. There is nothing difficult about finishing Canon ij setup because you must follow the correct steps that will assist you in properly setting up your Canon printer. This printer is very good. On either a Mac or a PC, you can connect to the internet wirelessly. If you’re looking for instructions on how to connect a Canon TS3122 printer to a wireless network, look no further. So just follow the steps outlined below.

How do I install ij.start.canon/ts3122 on Windows?

The steps listed below must be followed in order to install and operate Canon IJ setup on ij.start.canon ts3122. The Canon IJ Utility assists you with a variety of tasks, including printing, scanning, network configuration, and more. Ensure that your internet speed is enough before beginning the Canon Pixma TS3122 Printer WIFI setup process. Then begin the procedure for connecting a Canon TS3122 printer to a Wi-Fi network on a Mac or Windows computer.

  1. To begin, you must select the easy wireless connect option on the printer and install the ij.start.canon ts3122 drivers on the PC.
  2. If the On bulb is flashing, press the stop key on the control panel. Now press the direct key and hold it for a few seconds.
  3. The Wi-Fi logo will begin to blink after the connection is complete. After that, on the first display panel, press the start setup key.
  4. Select a region and accept the licence agreement by clicking yes. Select Next and then select a connection method.
  5. Wait until the network setup and print head alignment are finished before moving on. Select any other applications you want to install on the next screen.
  6. The ij.start.canon ts3122 setup is finished, and the software is installed.

WPS Connection Setup for PIXMA TS3122 is Simple

Make sure your wireless network and printer are both turned on before you begin. When the device is turned on, both of them should exhibit green lights.

  • Make certain that the wireless router’s WPS button is ready to be hit.
  • Press and hold the Network button (A) on the printer until the Network standing icon (B) flashes, then release the button.
  • figure: The Network standing icon flashes when you press and hold the Network button.
  • Within two minutes, press and hold the WPS button on the wireless router.
  • See the wireless router instructions for further information on hitting the WPS button.
  • The Network standing indicator and Signal Strength icon (C) will light up when the connection to the wireless router is complete.
  • The Network standing icon as well as the Signal Strength icon are both illuminated.
  • Troubleshooting
  • See “Troubleshooting” if the Alarm lamp illuminates.

If you’re having trouble connecting your wifi setup to your Canon Pixma TS3122, simply download the drivers from the ij start canon ts3122 website. Check the router’s physical connection as well as the internet speed.