Stop the water supply to the sink
If your wash basin faucet leaks, the best way to fix the problem is to stop the water supply to the sink and to shut off the water. This should be done under the sink. To test the leak, put a paper towel over the drain opening and then check for wetness. You can also try to clean the spout with distilled white vinegar. To stop the leaking, you need to replace the seals.
Check the handle and the valve body
Turn on the water supply and then open the faucet. If the water is leaking, check the handle and the valve body. A small index cover may be missing or damaged. Using a screwdriver, lift it off the faucet to remove it completely. You can use a hex key wrench to unscrew the cap. If you see water, you need to replace the handle. If you can’t remove the washer, then you should replace it.
Check the O-ring
If your sink faucet is leaking, check the O-ring. To remove the O-ring, you need to remove the cap and screwdriver. If you can’t do this, you may need to call a plumber to fix it. If the handle and cartridge are damaged, it’s time to replace the faucet. It’s easy to repair the faucet. The only thing you need is a wrench. It should be tight enough to hold the faucet in place.
Check the washer
Next, check the washer and the valve. The leaking washer and valve must be replaced. Lastly, make sure the packing nut is also secure. If it’s not tight, you’ll need to replace the stem and the packing nut. If the stem and splines are tight, you should try the wrench to replace them. You can also replace the O-ring and the escutcheon.
Turn off the water and reinstall the valve
If the washer is loose, you can turn off the water and reinstall the valve. To stop the leaking faucet, you should cover the drain and reattach the handle. The spout must be aligned correctly. A faulty gasket is responsible for leaking water. You can easily replace the valve and the stem. However, you must be careful not to accidentally damage the faucet. It’s best to contact a plumbing company to repair the leak.
There are several factors that can cause your wash Nivito to leak. It may have been affected by corroding, or by sediment buildup. Another factor is the washers. If the washers are loose, they can cause the leak. An O-ring holds the valve in place. An O-ring can also cause a leak. The O-ring can be easily repaired by a professional. A new washer will help to prevent the washer from separating from the valve.
To repair a leaking wash basin faucet, you need to identify the source of the leak. The main culprit is a broken washer. It will have to be replaced. The replacement part may be a new washer or even a broken cartridge. You should also check the other components of the faucet, including the faucet’s cartridge. If the replacement part is faulty, you should call a plumber. Then, you should replace the cartridge and tighten the adjusting ring.
