Water and its properties which are a function of its temperature, find a wide range of applications in industrial, domestic, and other uses. To reap the benefits properly in industries, homes & we must possess the appliances needed for heating. Geysers are the latest trend in heating appliances, but it is not easy to afford, so the need for water appliances.
Immersion Heater is available both online and offline, in multiple ranges for domestic use proportionate to your bucket size to that for industries proportionate to the size of the big tanks. They are fast heating devices & have a coiled shape and a chord. 
Where do immersion heaters come from, and how do they function?
This heater is an electric water heater housed inside the hot press’s cylindrical boiler-like device, despite common misconceptions to the contrary (also known as the immersion tank).
This heater is powered by direct current electricity, which it uses to heat the water in its vicinity.
One could compare an Immersion heater to a kettle in that both are used to boil water with the help of an electrical current. If a home does not have access to a natural gas pipeline, it may be the sole option for heating water. Some people use them as their sole source of hot water & while others use them to supplement their existing central heating/boiler system.
Because large-capacity immersion tanks are available, these heaters can benefit enterprises that utilize a lot of hot water at once (like a hair salon).
During the summer, when most people turn off their central heating, an immersion water heater and tank can come in handy for those who don’t want to switch on the entire system for the sole purpose of heating water.
What are the Features of an Immersion Heater?
The main features of this heater are as follows:
Do not possess a thermostatic device so needed to be checked upon when in use to prevent any mishap.
It is necessary to ensure that it is completely immersed in water when in use as the name suggests & otherwise may risk causing fire and damage to the appliance.
Before choosing a brand tag to buy from, look for valid warranty and energy use credentials and decide accordingly.
From the above points, it is very evident that these appliances needed to be held with utmost care.
Precautions To Take While Using An Immersion Heater
The following are the necessary precautions one needs to follow:
Keep the Kids At Bay: Keep the kids away when in use.
Follow the Immersion Rule: Immerse before and switch on later.
Beware of the Shock: Do not touch the water when the immersion rod is inside the bucket/container.
Plastic is Good: Use plastic buckets, not metallic buckets.
FAQ:
How long does it take for a water tank to get hot using an immersion heater?
Water heated with Immersion heaters can take up to two hours to reach the required temperature in a storage tank. How long it takes depends on the water tank’s capacity and the heater’s strength.
Is there a way to lessen the immersion heater’s energy consumption?
Thermostats for immersion heaters and proper insulation can significantly cut energy costs. Please verify that the thermostat on your immersion heater made by Immersion heater manufacturers in India is in good working order and that it is set to a safe setting. Spending money to heat water to the point that you have to add cold water to it to take a shower is a waste.
But don’t forget to boil the immersion tank water to around 50 degrees Celsius to eliminate bacteria.
While many newer immersion tanks already have insulation built in, an extra lagging jacket is a must if you have an older tank. You may find lagging coats at your neighborhood hardware store.
What is the function of an immersion switch?
Setting the immersion to the sink switch means you may take fast showers without using as much water or electricity. The Cartridge Heater features an on/off switch and a sink/bath switch. Theoretically, you can use the hot water from the sink switch for sink tasks like washing dishes and hands, while the hot water from the bath switch can be used for a full soak or a quick shower.
You only need about a third as much hot water for a shower as you would for a bath if you keep the plug in the tub while you shower. We suggest you turn the knob to the sink and hop in the shower. You’ll save money on your water bill and electrical costs by using the shower instead of the bath.
When using these heaters, is it safe to leave these heaters on?
Leaving the Immersion heater on is unnecessary. Two significant issues can arise if you do leave it on all the time:
A full breakdown of the immersion’s functionality is possible.
This cylinder’s water could potentially boil. The cylinder forces the hot water into the attic’s cold-water tank. After that, even the cold water from the faucet will be scalding hot.
Leaving the immersion heater exported by Immersion Heater Exporters in India leaves you vulnerable to burns from the hot water. Having the immersion running constantly is also very expensive. Turning it on overnight is preferable so that you may have a hot shower first thing in the morning.
Conclusion:
According to standards and various laws for consumer protection, Immersion Heater Suppliers In India need to provide the above features, precautions, and risks associated with the in a language easily understood by the consumer & to address the grievances of the consumer accordingly.
At Patel Heaters & Control Pvt. Ltd & their products are in line with the above standards. They manufacture safe, durable, top-notch quality, and Customer satisfaction is their foremost goal.
