HP Printer error 60.02 is just one of the common problems in these types of printers and can arise due to an incorrect installation of the input. This error can also result in a loud sound before doing any print jobs. The fix you can implement to rectify error 60.02 on your HP printer may prompt you to reinstall the entry. Other probable causes of the HP 60.02 error code include a broken spring, newspaper sheet folds, improper operation of the paper detector, etc.

In this guide, we have recorded the causes and fixes for error message 60.02 in detail. We have also registered the HP versions that you will be able to implement these fixes on. Have you interested in learning more about HP Error 0xc18a0206. Please read this blog as well.

What are the reasons for error 60.02 on an HP Printer?

HP printer error 60.02 might appear on your device due to misconfiguration of the newspaper sheets in the tray. This could cause the menu sheets to fold. Now let’s take a look at the other reasons that could be causing the error:

  • The sheet of paper that is connected to the inlet may need creases on the inside as the 60.02 error could be telltale.
  • There may be some difficulties with the elevator motor or with the paper.
  • You can also evaluate the spring that is connected to the surface of the elevator motor for damage. A broken spring could also be among the causes of this HP 60.02 error.
  • Another reason for this specific error to occur could be that the newspaper detector is still taking too long to start working.

As we have discussed the causes, we need to move on to the repair section to understand how to resolve this type of error.

How to resolve HP error code 60.02

If you want to resolve HP error 60.02, you can try reinstalling your printer’s paper tray. Also, we recommend that you inspect the elevator’s paper and motor. If they are found broken, you can choose to replace them. Also, make sure you have placed your HP machine on a new, level surface.

You can read further if you want to understand more about the fixes that can be implemented to resolve error 60.02 on your HP printer.

Reinstall the Paper tray in your Device

The 60.02 error may have appeared as the newspaper sheets could have been installed incorrectly. To properly reinstall the input, you must remove all sheets of paper in addition to the tray. Carefully keep the sheets back out of the tray, making sure the alignment of all the sheets of paper is accurate.

You can follow the instructions provided here to successfully reinstall the entry:

  • Open the “Paper Tray” of this HP printer.
  • Remove all the sheets from the tray and place them on a new surface.
  • Pull out the “inbox” on the device.
  • Again, put the sheets in the tray.
  • Put the tray back in the machine.
  • In case you come across a message showing “Out of Paper” on your printer screen, please align the back of this newspaper correctly.
  • When complete, insert the sheets.
  • Finally, do a test print just to make sure the error has been resolved.

Reinstall the spring in your HP Printer

A broken spring could be the main reason behind the 60.02 error on your appliance. This can also cause problems with the equipment in this paper tray. You can replace the spring with a new one to fix this error. It is possible to uncover the spring on the lift motor cover towards the right cover of the HP device.

If you want to know how to replace the spring in the right way, you can follow the instructions below:

  • Open the cover of this printer on the ideal side.
  • Look at the elevator motor today. The spring is going to be attached to the peak of the motor.
  • Gradually pull out the spring.
  • Turn a coil that has been connected to the spring.
  • Place the coil and spring in their initial positions.

Replace the Paper Tray / Lift Motor

If you find that the spring in your HP printer is not broken, you can try replacing the paper or elevator motor in your HP printer. Because this is a critical part of your appliance, replacing it with a working one is probably perfect. After replacing this component, the HP error 60.02 may have been fixed.

Keep your HP device on a Flat Surface

There may be a risk of your device being stored at an angle. This could also be preventing the tray from lifting up. Therefore, you may be seeing error 60.02 on your HP printer. You want to be sure that your printing system is placed on a level surface and in a clean atmosphere. Otherwise these errors will continue to appear.

Correctly Position the tray of the HP Printer

In case the input is not properly seated in its own slot, you may notice an irritating sound every time you try to print together with your HP Printer. It may also be followed by the 60.02 error message on your printer.

In case you have not set the paper correctly, it may lift up at the back when you provide a print control. To eliminate this issue, you can add a very small spacer in the ideal corner of the tray. Also, this can suppress sounds and resolve error code 60.02 at exactly the same time.

End

When you are working on your HP LaserJet printer, you may run into error 60.02. It could have been caused by a broken spring. You can solve this problem by replacing the spring that is damaged and then bending the coil under it, as you read here. Several different causes for the existence of the problem can consist of an incorrect installation of this paper, keeping the device on an uneven surface, together with a faulty lift motor. It is possible to go through our repair section to rectify this matter.

We hope you enjoyed this guide and we can provide you with some additional details about error code 60.02 on your own printer. Here, you can also see here a complete guide to fix HP error 49.38.07. In case you still have any questions, please write them in the comment section. We will respond to your comment as soon as possible.