Taking a warm bath, it is one that helps us to relax very well. Because it stimulates the blood flow to increase especially in winter, having a water heater is a good thing. But the first thing that we have to consider is to buy a water heater that is suitable for use and study the safe installation of water heaters first. In general, calling a service technician from the brand you choose to buy is probably the best option because they have direct expertise. But if you need to find an electrician or install it yourself should know how to install correctly and safely.
How to install a water heater correctly:
You should consult the installation instructions from the installation manual that comes with a water heater.
Open the water heater cover to inspect the equipment, wiring connections and wall mounting points.
Determine where to install taking into account the convenient location of the faucet. connection and wiring Should be about 1.6 meters high from the floor and the right side of the shower. Look at Waterheaterabout website if you require details resources about water heater.
Turn off the breaker at the control cabinet for safety at work.
Wiring and grounding to the installation point and should install another breaker in front of the bathroom to prevent short circuit.
The selection of wire size must be standard. It can be easily calculated, for example, a water heater with a power of 3,500 watts, divide by 1,320, the result is 2.65. This means that we will have to choose a wire with a cross section of not less than 3 SQ.MM.
Drill the wall with a drill hammered into the wall Hang the water heater to the screws on the wall to be strong.
Connect the power and ground wire to the connection point inside the water heater. Use a screwdriver to tighten the screws to secure the wires. Close the cover (1 point “L” positive wire, 2 “neutral” wire, 3 ground wire, or “G”).
Connect the water line to the machine according to the water inlet position then connect the shower hose to the water outlet.
Turn on the water to test the water flow to have normal pressure and check for any leaks.
Turn on the power system to test the operation of the water heater. that the working status light is normal And the water temperature is high according to the adjusted level. Press the Test button. ELCB/EELS electric shock protection device. If normal, the machine will turn off immediately. When finished, press RESET to make the machine work normally. If you press TEST and find that the machine does not turn off, you need to check and fix the problem before use.
In addition to how to buy, choose a water heater that is suitable for use and the installation of the water heater. How to use water heaters correctly and maintain proper water heaters. It is important that you can learn more from tips for using water heaters safely.
