Car waxing is a popular auto detailing method that maintains the car’s appearance in its best possible state, particularly on the outside, as against mechanical or exterior detailing. This is done by physically removing all visible and virtually invisible contaminants from the inside and exterior of the car and then polishing the surface to a high shine. The car wax is usually an extremely thick liquid, which is spread onto the surface of the car with a sponge. It is very effective at removing any stains that may have developed over time and helps make the car look brand new and shiny.
In fact, car waxing has a number of advantages over other types of waxing methods. The fact that it is applied directly to the car’s surface makes it highly effective at cleaning. In addition, it is completely dry after being applied – unlike most other forms of waxing, which needs to be re-applied or left to dry on a surface for a significant amount of time. Car waxing also dries incredibly fast, meaning the car can be cleaned and dried in as little as a matter of hours, rather than days or weeks. Car wax is also relatively cheap, being a cost-effective means of ensuring that the car is looking as good as new when the winter months start to backfire. All in all, car waxing is undoubtedly a cheap but effective way of keeping the inside and outside of your car looking as clean and shiny as possible.
But can car waxing actually work during the summer months? Well, the answer is yes. If you want to keep the outside of your car looking as clean and shiny as possible, and if you are planning to take your car out on the road during the hot summer months, then applying some car wax will do the job. As such, it’s not something you should avoid at all costs. Here are some tips on applying car wax, no matter the season:
Tip one: Before doing any waxing, you need to make sure that you have picked a quality brand rather than one that’s cheaply made. This will ensure that your car care products work as effectively as they are intended to. You should also read up on the specific car waxing product you are planning on using so that you know how to prepare your vehicle for application. Many sealants and moisturizers will come in pre-determined packs, but you must read the instructions thoroughly before you begin washing to ensure that you don’t ruin the finish.
Tip two: Once you’ve properly armed yourself with the proper ingredients and tools, it’s time to go about your car waxing or car polishing duties. If your paint job is still in relatively good condition, then this may simply require some gentle rubbing and buffing. A good car care tip is to always start with a slightly dull buff to allow your paint to become ready for car polishing. The last thing you want to do is irritate the finish and leave it more reflective than before.
Tip three: If you’re planning on having a waxing session, you should always let the wax sit on the surface of your car for at least half an hour before you start working on anything else. This allows the wax to seal in some of the harsher elements of nature, such as dirt and dust. If you don’t wait long enough, you’ll end up with a messy pile of goop when you’re done. If you’ve got any chips or scratches in your paint job, those should be lightly sanded before starting the polishing process. You may also want to have some form of protection like auto shine on hand for touch-ups.
Tip four: Some people like to have a mini vacuuming of their vehicle before they start waxing. This helps get rid of any other dirt or debris that may be on the surface as you’re working on it. The goal of this step is to make your car look as clean as possible while at the same time removing as much wax as possible. Be careful not to remove too much, however, or you’ll end up with a sticky residue that will make the paint look dull and streaky. The best thing about mini vacuums is that you can do the waxing on a much smaller scale than you would with a large vacuum.
Tip five: Once you’ve finished waxing, be sure to let your car wax sit dry for at least 24 hours before re-waxing it. You can speed up the drying process by directly applying some petroleum jelly or automotive paste wax to the surface. This coating will prevent water from evaporating into your wax. Be sure to coat each tooth individually with the wax before you put the cap back on the pipe; otherwise, the entire surface of the tooth might not get wet enough to stand still during the waxing process.
Visit Coombs Auto Spa, we have the latest equipment and techniques for your best Car’s Waxing service. Be it a sunny day or a dusty one, we keep your vehicles under a covered area, and once we do the job, the protective layer handles the rest.
