Fiber optic cables are increasingly becoming popular in developed countries like the United Arab Emirates. The higher speed, bandwidth and improved network quality are the major reasons behind the popularity of fiber cables. They have almost replaced the copper cables; however, some people still prefer copper over fiber cables due to strength concerns of the latter.

The fiber cables transmit a signal through the glass strands, which is considered not so strong. To negate this concern of the users, the manufacturers have introduced the armored fiber cable, which is much stronger, in addition to being effective. It has multiple layers and coatings that protect the glass from outer and internal issues, and provide protection against damage due to crushing, bending or breakage.

Types of Armored Fiber Cable

The following are some of the most common types of armored fiber cables:

  • Interlock armored fiber cable
  • Corrugated armored fiber cable
  • Tight-buffered armored fiber cable
  • Loose-buffered armored fiber cable

Features of Armored Fiber Cable

Armored fiber cables are quite popular in multiple types of settings because of the following crucial features that improve their effectiveness:

  • Flexible and easy to use
  • Rodent resistant
  • Higher attenuation
  • Moisture protection
  • UV rays and weather protection

Application of Armored Fiber Cable

The effectiveness of armored fiber cable is significantly dependent on the type of setting in which it is installed. The following are some of the ideal settings of armored fiber cable installation:

  • Indoor settings
  • Outdoor settings
  • Rocky soil
  • Underground application
  • Underwater application
  • Date centers

Keep scrolling down this article to explore a brief guide about armored fiber cables.

Top 5 Steps to Ensure Perfect Armored Fiber Optic Cable Installation

The armored fiber cable is one of the most effective and efficient categories of fiber optic cables, which has proved its strength and suitability for multiple settings. It can be used to enjoy high-quality network speed and signal, without any interruption or danger of being damaged by internal or external conditions. However, to achieve these benefits, ensuring proper installation is crucial.

Here are the top steps you need to perform to ensure the perfect installation of armored fiber cables.

1. Bend Cable

The first step of ensuring the perfect installation of armored fiber cable is to bend the cable. For that, you need to bend the cable leaving ten inches from both ends. You have to squeeze the cable to the point the coils of the cable get separate. Doing this with the hand can hurt you, and not doing so can affect the quality of the bend. Therefore, most users acquire the help of fiber optic cable Dubai based companies to let the experts provide perfect installation using professional techniques.

2. Twist Cable

The next step to ensure the perfect installation of armored fiber cables is twisting the cable. You cannot just randomly twist the cable at any end but have to perform this step diligently. Secure a tight grip on the cable at both ends of the cut. After that, twist the cable to the point that the already split armor coil comes out of the cable. Twisting the cable can also hurt your hands. So, be careful while doing so.

3. Cut Exposed Coil

The next step in the process of perfect installation is cutting the exposed coil. To ensure smooth cutting without causing any damage, grab the coil from both ends with the help of a cutter. Move it back and forth to make a smooth cut. After that, you can use the side cutters out the exposed part of the sheathing and prepare it for the next step.

Read also: Regulatory Framework of TRA in the UAE

4. Cut Wires

After cutting the exposed coil, you need to cut the wires according to your requirement. If you do not require a cut wire, stop at cutting the coil. On the other hand, to cut the wire smoothly, you need to slide the sheathing back and thoroughly cut the wire. Be very cautious at this step in order to avoid damaging the wires.

5. Remove Excess Wire

Preparing the armored fiber cable perfectly is crucial to ensure a smooth installation, which provides a high-quality network with high speed. The last step in the process of ensuring such an installation is removing the excessive wires after bending, twisting and cutting the cable.

For that, you need side cutters. Grab the side cutters and cut the paper wrapping, plastic strips or extra covering over the sheath. There is a high chance of damaging the cable in this step. Therefore, it is better to get in touch with Tarkeeb.ae a telecommunication solutions provider in Dubai and ask the experts for a perfect and professional installation that does not compromise quality or speed.

Read also : Network Cabling Tips Related To Business Relocation

Handle armored fiber cable professionally!

The armored fiber cable is one of the strongest fiber optic cables, which does not compromise the quality of connection and provides protection against internal and external conditions. However, all of this is applicable after the installation of the cable.

During installation, you have to be careful as you need to cut the coatings and protective layers to connect the internal glass strands to transmit the signal. Doing so requires expertise, so do not test your skills until you are ready to face loss. Consult the professional to get a smooth and hassle-free installation.