1. To begin, ensure that the battery part is unlocked by gliding and holding the fastening.
  2. Then open the part by gliding the battery flap back.
  3. Place the batteries in the part and shut it with the flap.
  4. After that, move the camera within a 30-100cm-foot range of the base station.
  5. Now steps to Sync the camera to the base station:

To begin, press the sync button on the side or right side of the base station for around two seconds. If you’re utilising an Arlo base station, you’re in luck.

Remember not to hold down the Arlo Wire-Free Sync button for too long; if you do, the LED below the USB symbol will glow amber for 10 minutes. And as long as the USB LED is flickering amber, the sync operation is halted.

6. If you have an Arlo Pro base station, press the button on the top of the base for around 2 seconds. Hold on for a few seconds until the sync LED begins to glow green.

7.

7. Then push Sync button for around 2 seconds which is on the top of the arlo camera.

Note:  Make sure that the cameras must be synced one at a time.

When the camera’s LED blinks blue, it means the sync has been confirmed.

If the camera’s LED is blinking amber, it means the sync was not successful. The sync operation must be repeated.

8. Now all you have to do is double-check the camera LED on the base station.

When the camera LED on the base station turns solid green, it means the sync operation has completed properly.

9. Now restate all the steps for each camera.

Note : If you’re having trouble finishing the sync procedure in 60 seconds, try pressing the Sync button on the base station again.

The Arlo camera setup is discussed here. The Arlo camera is a 100% wire-free, completely wireless HD smart home surveillance camera that allows you to get exactly the shot you need, whether inside or out. The Arlo camera is weatherproof and comes with features like movement detection, night vision, and apps. It can record footage and send you warnings whether you’re at home or away, giving you peace of mind around the clock.

  • Voice control is supported with Alexa (Alexa device sold separately); audio is not supported.
  • 100 percent patented Free construction that can be placed anywhere.
  • Even in complete darkness, night vision cameras function.
  • Motion-activated cameras that provide notifications through email or app – With 7 days of free moving cloud storage, it only records and alarms when motion is detected.
  • Climate-safe cameras can be used both indoors and outdoors. Wireless range: 300 feet or more in a straight line
  • The Arlo Pro is a separate product from the ordinary Arlo camera.
  • 14° to 122° Fahrenheit (-10° to 50° Celsius) is the working temperature. ST (ST) (ST) (ST) (ST) (ST) (ST) (ST (2 ft to infinity)

For more info visit our site arlo com/support number