In this blog article, we take a detailed look at pool cue components to see what you need to have on hand when building a new pool stick. The article discusses points such as what type of wood should be used for the shaft, what types of shafts are available, and how you can compare the different materials available in order to figure out which one is right for your budget.
What materials are needed for a Cue?
The first thing that you need to decide is whether or not you want to go with a standard pool cue, or if you want to make your own. Standard cues are the most common type of cue. They are made from wood and use either leather or vinyl on the butt cap. However, there are some more advanced cues that can be constructed out of aluminum or some other type of metal.
Cue components – wood, tips, shafts, joints:
There are a few things that make a great pool cue. First, the wood quality is imperative. The wood should be strong and dense enough to flex without cracking under pressure. Second, the shaft needs to be flexible but not too thin. It’s important that it’s hard for any play or breakage to occur in the shaft. Third, the joint needs to be durable enough to handle the tension of hundreds of shots per day.
What tools are used for Cue building?
There is a wide variety of tools that are used for cue building, such as screwdrivers and pliers. These tools are usually made of metal or plastic.
What do you know about Cue components? Toe rods, Crown rods, Butt rods:
A pool cue is never complete without a set of pool cues. However, to achieve the best feel and performance, it is important to have the right tools to work with. Since cues come in different shapes and sizes, having the right tools is crucial for success. Toe rods are used by most cue makers in the cue butt section that connects the shaft to the case. Crown rods are used to form a permanent bend at the point where the shaft meets the case. Butt rods are short pieces of wood with a bulbous tip that are inserted into sockets on either side of the butt section so that
Finishes you need to go for:
Using a high-quality brush, apply a thin coat of cue wax to the cue. If you are adding a new finish, this is the time to do so. Always pass your work through a drier or hot air gun to remove excess water.
Choosing the right cue bag:
If you are looking for a pool cue bag, it’s important to be aware of the different types of bags that are available. There are two main types of cue bags: a hard case and a soft case. Hard cases typically don’t come with a shoulder strap, so they’re usually used for storage purposes only. Soft cases have many pockets and can hold accessories and cue components such as chalk, shafts, and other pool supplies.
