Do you handle liquids that need excellent heating and controlling their rate of flow? Then, a high-temperature flow rate meter will give you the best solution. It assists you in monitoring the flow rate of thermic transfer liquids and container heating liquids.
Get 8000XHT series of the liquid flow meter. It will assist you in measuring the rate of liquid flow at low and high temperatures. This high-temperature flow meter will give you reliable data. Its effects on heat transfer fluids are cost-effective and reliable.
Guide on 8000XHT high-temperature flow meter works
The 8000XHT series high-temperature flow meter has a unique method by which it runs. It works based on specific magnets that change. For example, the 8000XHT has north and south magnets. They rotate as water flows through the sensor cavity. That will then produce a turn in the rotor.
As an outcome of the spinning rotor, pulses are sent by two flux hubs and then to the switch. The switch is a couple of hall-effect sensors set on the main electronics board. In addition, 8000XHT has an installed microcomputer that serves to reduce the rotational rate of the rotor. It then compares the parts to clear memory that determines the amount of the fluid flow rate.
The 8000XHT series high-temperature flow meter has a relay trip point that you can fit with comfort. Its trip point is set to become if the output flow goes under the preset alarm value. The flow meter comprises a tricolor LED. It will provide you visual evidence of your liquid flow rate status.
Every part of this high-temperature flow meter begins with an alert trip point preset by the supplier. That is intended to guarantee you get perfect effects. It also serves to stop needless tampering, which may influence how the flow meter works. The creator of this flow meter produces an above flow limit of 15%. But you may demand a customized trip point perspective when ordering for this tool.
How to fit 8000XHT flow meter
The internal diameter of pipes that get in and tools connected to its inlet changes the flow reply of the 8000XHT series. In addition, upstream tools may influence how it runs. That is why you require to have a run of vertical pipe. The pipe should have a period of not less than ten points of the internal pipe diameter. Secure the pipe is arranged between the flow meter and the upstream methods.
Make sure you see the joint size and the inside diameter of your high-temperature flow meter. You will then be needed to make links to a non-adjustable or flexible SAE setup, as shown. You must grease the flow meter tapes and O-rings using system liquid before fitting to check galling.
When you are done with relationships, turn on the fluid flow but secure to be slow. That will assist you in recognizing leaks and stretch the link to eliminate all leaks. Do not forget to expel air in the flow cavity of your 8000XHT series flow meter.
Conclusion
8000XHT series high-temperature flow meter can give you perfect outcomes of the flow rate of the monitored liquids. It works uniquely. Once you have connected, guarantee to check daily. The fitting method is not complex, but it’s necessary to have a specialist.
