If you plan on becoming a good hunter, then the first thing you should be the best at is using a rifle. However, using the rifle is not enough because several different types of rifles are available in the market.

Using a rifle equipped with an optic scope is different from using a normal rifle. The optic scope will help you aim and shoot down targets from a far distance.

You must have seen snipers lay on the ground and adjust the instruments on the scope to get a clear shot. Using a scope will be difficult if you’re unaware of all the small digits around the scope.

Hence, today we will explain a few tips that will help improve your accuracy while using a rifle with an optics scope.

1- Purchase necessary mounting equipment

Without the right equipment, improving your accuracy won’t be an easy task. A piece of good mounting equipment includes a good scope base, well-aligned scope rings, good scope sights, and eye relief.

2- Adjust and properly align the reticle and eye relief

If the scope’s reticle is not aligned properly, it will mess up the images you see, and you might miss your target. The reticle is the image that shows where you have pointed the rifle.

Reticles are usually in circles, axis or cross-hairs. Place your eyes at a safe distance from your eyes. If you’re too close to the rifle, it might damage your eyes after firing.

3- Have a decent sight picture

The important factor that determines your accuracy is the type of sight picture you get when aiming. You get a good sight picture when the reticle is in the middle of the field.

You can achieve a good sight by adjusting various dials of the scope and bringing the reticle to the middle of the field.

4- Properly view your scope

Before you take your rifle for hunting, understand your scope properly and find the best view on your scope. While looking through the scope, check if there are any shadows, which can cause you to miss your target in time.

If the lenses are not aligned properly, the image quality will not be accurate. If you see any swinging at the target point, ensure that the swing area is as little as possible.

5- Test and arrange the rest

Once you’ve had everything placed on your rifle, it is now time to take your rifle for testing. You might not always get the best results on the first go. You may need to do some trial-and-error methods.

Try firing at the same place a couple of times, and then check the results. If you’re happy with the results, then keep in mind the adjustments of the dials you made before firing. You can always refer to the manual and understand how to deal with some errors.

Wrapping up

These were a couple of ways by which you can improve your accuracy using a rifle with optics in Canada.

For more details about Sig Sauer in Canada please visit our website: rangeviewsports.ca